Is It Expensive To Stain Hardwood Floors?

How much does it cost to stain and refinish hardwood floors?

The average cost to refinish hardwood floors is $3.75 per square foot with most homeowners spending between $3 and $5 per square foot to have their wood floors sanded, stained, and finished..

How long should wood floors last?

approximately ten yearsOn average, a hardwood flooring finish lasts approximately ten years. But with proper care and maintenance, it can last much longer.

Are hardwood floors worth it?

If you’re a buyer, picking a home with hardwood floors is usually worth it. The high initial cost has already been paid, so you can reap the long-term benefits. If you’re willing to put in work yourself, you could find a house with hardwood underneath existing carpet.

How much does it cost to stain a wood floor?

Divide the total square footage of the area you want to stain by the square footage covered by a can of your chosen stain. Round the result up to the next whole number. For example, if you have 400 square feet of floor to cover and a can of stain covers 220 square feet, you need two cans of that stain.

Is it cheaper to refinish or replace hardwood floors?

In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. … Even if you have this, it will still be less expensive then replacing the whole floor.

How many coats of stain are needed on hardwood floors?

three coatsHow many coats will be applied? The standard for a hardwood floor is at least three coats. This consists of one seal coat (which may be the stain) and two coats of finish. Additional costs of finish may be applied depending on the need.

What is the best stain for hardwood floors?

THE TOP 5 FLOOR STAINS FOR HARDWOODMINWAX. Minwax is the go-to floor stain for the everyman. … BONA DRIFAST STAIN. Bona is an oil-modified stain that is ready for reapplication in two hours. … DURASEAL FASTDRY. DuraSeal is a little harder to find, typically available at Hardwood supply stores. … FABULON CRYSTAL. … VARATHANE BY RUSTOLEUM.

Are dark floors out of style?

While dark hardwood flooring has a special beauty of all of its own and it has been fashionable for a while now, it’s likely to fade out in favourability. Trend is going towards lighter woods such as natural oak.

Is light or dark wood floors better?

There will be a higher chance of scratches and scrapes, which light hardwood can hide better than dark hardwood. … While you’re free to mix and match styles, many homeowners find that darker hardwood flooring lends itself to a more rustic design, while lighter wood is used to create a more contemporary style.

Is it safe to stay in house after polyurethane?

We recommend a minimum of 2 days of socks-only traffic for floors finished with oil polyurethane. The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in.

How much does it cost to refinish 1000 square feet of hardwood floors?

Cost per square foot to refinish hardwood floors:Flooring square footageAverage cost100 – 250 sq. ft.$600251 – 500 sq. ft.$750501 – 750 sq. ft.$1,601751 – 1000 sq. ft.$2,1003 more rows•Oct 26, 2020

Can you use a roller to stain hardwood floors?

When the stain is completely dry, it’s time for the last step—protecting the finish with polyurethane sealer. Using a high-density foam roller (and, if necessary, a two-inch brush for some parts of the room), apply a thin, even coat across the entire floor surface.

How long does it take to refinish hardwood floors?

3-5 daysIn general, it will usually take 3-5 days to refinish hardwood floors with an oil based polyurethane (+ drying time), pending on whether there is a stain/how dark the stain is/how humid it is and how many coats of polyurethane you apply.

What is the best way to apply stain to hardwood floors?

Dip rag or sponge into stain and apply stain to floor, going with the grain rather than against. Work from one side of the room to the other, frequently wringing out rag or sponge so coverage is even and stain doesn’t pool on floor.

Is it better to brush or roll polyurethane?

Polyurethane tends to dry faster, and you can use a paint roller or a brush for application. If you use a roller to apply the polyurethane, you get to eliminate possible brush strokes and lines; it also helps to minimize the chances of over-application of the finish.

Do more coats of stain make wood darker?

Apply a second coat of stain after the first has dried fully. This will usually produce a darker coloring, but it adds a step to the process and slows production. Substitute a glaze or gel stain for the liquid stain. Glazes and gel stains usually contain a higher ratio of pigment.

How long after staining can I polyurethane?

Every finish and stain is different, and drying times can vary widely from brand to brand or product to product. As a rule of thumb, you should wait 24-48 hours to allow the stain to fully dry before applying your polyurethane. If you’re extra cautious, you may even choose to wait 72 hours before applying your poly.

How do you tell if wood floors can be refinished?

After about 20 years, most hardwood floors start showing their age; scratches, dullness and discoloring are the most common signs that the wood is due for refinishing. Fortunately, the typical ¾-inch-thick hardwood floor can be sanded about six to eight times during its lifetime.

Can you stain hardwood floors without sanding?

A good method of staining hardwood floors darker without sanding is to apply the stain directly after screening, then cover it with clear finish. If you apply a waterborne finish, which dries in a couple of hours, you can complete the entire operation in a day.

Is refinishing hardwood floors worth it?

Yes, it’s worth refinishing hardwood floors instead of replacing them. Refinishing is cost-effective, it’s quicker, and it’s a lot easier because it requires less labor. … A refinishing project takes less time and effort and, if done properly, can make old flooring look brand new.

How long should stain sit before wiping off?

Don’t worry about being neat; all that matters is getting a nice, even, liberal coat over the wood. At this point, wipe the stain off immediately for a lighter tone, or for a deeper tone, leave it on for five or even 10 minutes before wiping.